Nissan Forklift Prices [Top Models & Cost Per Unit]

While it’s well-known for its automobiles, Nissan has been producing forklifts since 1957. Today, you can purchase a variety of used Nissan forklifts.

Forklifts, or lift trucks, are an integral part of warehouse operations. Although you can rent or lease a forklift, if you’re planning on using this piece of equipment long-term, you might want to look at purchasing.

On average, a Nissan forklift cost between $10,000 to $17,500. Load capacity, the type of forklift, and hours of use will influence the pricing.

Model	Price
Nissan BX50	$14,765 USD
Nissan PE50Y	$11,000 USD
Nissan CF35LP	$13,500 USD
Nissan PF50	$17,500 USD
Nissan AH50	$10,000 USD

Nissan Forklift History

Nissan began the mass production of forklifts in Japan in 1961. In 1988, Nissan Forklift acquired Barrett Industrial Trucks Inc. and began producing forklifts in the US. Over the years, Nissan produced a variety of forklift models.

In 2013, Nissan Forklift Corporation became UniCarriers America. Therefore, models produced after 2013 are under the UniCarriers America name.

Nissan Forklift became the first manufacturer to obtain EPA and CARB certifications for its own engines.

Factors Affecting Nissan Forklift Price

Since forklifts haven’t been produced under the Nissan name since 2013, only used Nissan forklifts are available for purchase. However, you can buy new UniCarriers America forklifts, which are essentially Nissan forklifts under a different name (source).

When you’re looking at Nissan forklifts, the model, age, and operating hours all affect the price. The older the age and the higher the number of operating hours, the higher the price.

As the lift capacity increases, so does the price. Therefore, a forklift that can lift 6,000 pounds will cost more than a forklift that costs 3,000 pounds, if all other factors are the same.

Types of Nissan Forklifts

There are two main types of Nissan forklifts, based on how the engines are powered. These two types are internal combustion and electric.

Internal Combustion

Internal combustion forklifts use propane, gasoline, or diesel to operate. Therefore, you must factor fuel costs into their operating costs.

Electric

Electric forklifts rely on battery rather than fuel to operate. The batteries are rechargeable. These forklifts are mainly used for indoor use.

Types of Forklift Tires

There are two types of forklift tires: cushion and pneumatic. Some forklift models can only accommodate one type of tire, so make sure you check tire compatibility before purchasing.

Cushion

Cushion tires have a smooth surface that doesn’t provide much traction. Therefore, these tires are best suited for indoor use on a smooth floor. Cushion tires do offer a small turning radius, which makes them ideal for spaces that require supreme maneuverability.

Pneumatic

These tires’ tread provides a good grip. This makes them a popular choice for use in outdoor spaces or indoor/outdoor warehouses. While they offer better traction, they also come with a wider turning radius. Therefore, they’re not the best choice for tight spaces.

Nissan Forklift Models

There are lots of Nissan forklift models available for sale. We include the price for some of the most common models below.

Nissan AH50 Forklift

The AH50 is an internal combustion forklift that has a load capacity of 5,000 pounds. It comes with a full-suspension seat and a forklift with 10,500 operating hours will cost around $10,000.

Nissan BX50 Forklift

The BX50 Forklift is an electric forklift with a load capacity of 5,000 pounds. It comes with cushion tires and has a turning radius of 6.15 feet.

A model with around 6,000 drive hours will cost between $11,000 and $13,000 while a model with 9000 hours will cost around $9,000. 

Nissan PE50Y Forklift

The PE50Y is an electric forklift that operates off of a 36V battery. It has a lift capacity of 5,000 pounds.

A forklift with 4,000 operating hours will cost around $11,000.

Nissan CF30 Forklift

The CF30 is an internal combustion forklift with a lift capacity of 3,000 pounds. It operates using liquid petroleum gas (LPG).

This forklift comes with a spacious operator area and a full suspension seat. It also has an LCD display with a variety of diagnostic features.

A forklift with around 5,000 operating hours will cost between $13,000 and $14,000. 

Nissan CF50 Forklift

The CF50 is an internal combustion forklift with a lift capacity of 5,000 pounds. It has 55 hp and runs on liquid petroleum gas (LPG).

A 2013 unit with 5,000 hours will cost around $15,000 and a 2012 unit with 11,000 hours will cost $6,000. 

Nissan CF60 Forklift

The CF60 is an internal combustion forklift with a lift capacity of 6,000 pounds. It has 62.9 hp and a turning radius of 6.75 feet.

A used model with 8,500 operating hours will cost around $12,000 and a model with 9,000 operating hours will cost around $9,500.

Nissan CF35LP Forklift

The CF35 is an internal combustion forklift with a lift capacity of 3,500 pounds and 55 hp. It has low emissions levels and engines with electronic concentrated control systems.

A forklift with 6,000 operating hours will cost $12,500 while a forklift with 2,000 operating hours will cost $14,500.

Nissan MUG1F2A30LV Forklift

This forklift has a lift capacity of 5,000 pounds and operates on internal combustion. It has a four-cylinder engine and comes with pneumatic tires. A forklift with 2,000 operating hours will cost around $23,500. 

Nissan PF50 Forklift

This forklift comes with an internal float system which makes it more comfortable for operators. It comes with pneumatic tires and a lift capacity of 5,000 pounds.

A PF50 forklift with 3,000 operating hours will cost around $16,000 and a forklift with 1,000 operating hours will cost around $20,000.

Buying a Nissan Forklift

If you’re looking to buy a forklift, a Nissan model is a good choice. Since there are many used options available, you’ll be able to find a forklift that fits your budget and needs.

Depending on the lift capacity, operating hours, and model, you can expect to pay between $6,000 and $23,500.